Running the Security Camera Wires
If you are running CAT5/6 Ethernet cable indoors, simply drill a hole to run the Ethernet cable through any walls from the camera to the network video recorder. If the distance from the camera to the network video recorder is too long, you will use a POE injector or POE switch to increase the distance by up to 328 feet. Make sure to have an extra few feet on each side of the cables so you can allow room for cable termination and reorganization if needed. It is never a bad idea to label the ends so you know which camera is for each.
To install security camera wiring through a wall, drill a hole in the wall or use a wall plate and attach the cables to fish tape in order for you to “fish” the wires through. Consider using security camera wire protectors such as a tube to protect the cables. If running through the ceiling, consider using a cable guard or conduit so the installation looks neat, clean, and professional, and so that the cables are hidden.
When wiring cameras from inside to outside, drill a hole from the outside where the camera is being placed and run the cable back to the NVR. Use wire guards to hide and protect the cable. Conceal the wire holes with silicone or duct seal so moisture or water does not get into the cable.
3 Comments
John Smith 01 Jan 2024
Wiring is the part that generally takes the longest. If possible and applicable, use our plug-and-play pre-made cables to make the process even easier.
John Doe 02 Feb 2024
After connecting the CAT5/6 camera you will download your PC remote viewing software or cell phone app to view your cameras worldwide anytime, anywhere. We do not charge any additional fees for this service. There are no contracts, no subscriptions, and no cost at all.
John Smith 01 Jan 2045
Wiring security cameras is also not dangerous. The wiring used for security camera systems like Coax and CAT 5 Ethernet is low-voltage. So even an accidental electric shock won’t do much harm.
Leave a comment
Categories
Recent Post
Tag Cloud
Plain Text
Security camera systems like ours here at SamSmartCam CCTV Security use power and video capability in each cable end to make your installation fast, simple, and easy. We offer spools of CAT5, RG59 cable, and pre-cut plug-and-play cables here on our cables & connections page. When you purchase a spool of cable, you can make your own connections with the materials we provide. When you purchase our complete systems with pre-made cables, the connections are already on the cables. That makes installing and wiring your security camera system a snap.
Read More